3d Printing And Additive Manufacturing SCIE

國際簡稱：3D PRINT ADDIT MANUF 參考譯名：3d 打印和增材制造

主要研究方向：Materials Science-Materials Science (miscellaneous) 非預警期刊審稿周期：

《3d 打印和增材制造》(3d Printing And Additive Manufacturing)是一本由Mary Ann Liebert Inc.出版的以Materials Science-Materials Science (miscellaneous)為研究特色的國際期刊，發表該領域相關的原創研究文章、評論文章和綜述文章，及時報道該領域相關理論、實踐和應用學科的最新發現，旨在促進該學科領域科學信息的快速交流。該期刊是一本未開放期刊，近三年沒有被列入預警名單。

4區 中科院分區
Q3 JCR分區
129 年發文量
2.3 IF影響因子
未開放 是否OA
16 H-index
2014 創刊年份
4 issues/year 出版周期
English 出版語言

3D Printing and Additive Manufacturing is a peer-reviewed journal that provides a forum for world-class research in additive manufacturing and related technologies. The Journal explores emerging challenges and opportunities ranging from new developments of processes and materials, to new simulation and design tools, and informative applications and case studies. Novel applications in new areas, such as medicine, education, bio-printing, food printing, art and architecture, are also encouraged.

The Journal addresses the important questions surrounding this powerful and growing field, including issues in policy and law, intellectual property, data standards, safety and liability, environmental impact, social, economic, and humanitarian implications, and emerging business models at the industrial and consumer scales.

[ 查看全部 ]

投稿咨詢加急咨詢

3d Printing And Additive Manufacturing期刊信息

ISSN：2329-7662
出版語言：English
是否OA：未開放
E-ISSN：2329-7670
出版地區：UNITED STATES
是否預警：否
出版商：Mary Ann Liebert Inc.
出版周期：4 issues/year
創刊時間：2014
開源占比：0.1086
Gold OA文章占比：7.84%
OA被引用占比：0.0612...
出版國人文章占比：0.13
出版撤稿占比：0
研究類文章占比：95.35%

3d Printing And Additive Manufacturing CiteScore評價數據（2024年最新版）

CiteScore

SJR

SNIP

CiteScore 指數

0.646

0.982

學科類別	分區	排名	百分位
大類：Engineering 小類：Industrial and Manufacturing Engineering	Q1	90 / 384	76%
大類：Engineering 小類：Materials Science (miscellaneous)	Q2	52 / 196	73%

名詞解釋：CiteScore 是衡量期刊所發表文獻的平均受引用次數，是在 Scopus 中衡量期刊影響力的另一個指標。當年CiteScore 的計算依據是期刊最近4年（含計算年度）的被引次數除以該期刊近四年發表的文獻數。例如，2022年的 CiteScore 計算方法為：2022年的 CiteScore =2019-2022年收到的對2019-2022年發表的文件的引用數量÷2019-2022年發布的文獻數量注：文獻類型包括：文章、評論、會議論文、書籍章節和數據論文。

3d Printing And Additive Manufacturing中科院評價數據

中科院 2023年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	4區	ENGINEERING, MANUFACTURING 工程：制造 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	4區 4區

中科院 2022年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	3區	ENGINEERING, MANUFACTURING 工程：制造 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	4區 4區

中科院 2021年12月舊的升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	3區	MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合 ENGINEERING, MANUFACTURING 工程：制造	3區 4區

中科院 2021年12月基礎版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	2區	ENGINEERING, MANUFACTURING 工程：制造 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	3區 3區

中科院 2021年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	3區	MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合 ENGINEERING, MANUFACTURING 工程：制造	3區 4區

中科院 2020年12月舊的升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	3區	ENGINEERING, MANUFACTURING 工程：制造 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	4區 4區

3d Printing And Additive Manufacturing JCR評價數據（2023-2024年最新版）

按JIF指標學科分區	收錄子集	分區	排名	百分位
學科：ENGINEERING, MANUFACTURING	SCIE	Q3	41 / 68	40.4%
學科：MATERIALS SCIENCE, MULTIDISCIPLINARY	SCIE	Q3	275 / 438	37.3%

按JCI指標學科分區	收錄子集	分區	排名	百分位
學科：ENGINEERING, MANUFACTURING	SCIE	Q3	49 / 68	28.68%
學科：MATERIALS SCIENCE, MULTIDISCIPLINARY	SCIE	Q3	279 / 438	36.42%

3d Printing And Additive Manufacturing歷年數據統計

影響因子

中科院分區

3d Printing And Additive Manufacturing中國學者發文選摘

1、Effect of Alloying Powders on Microstructure and Mechanical Properties of Aluminum Alloy Arc Additive Manufacturing
Author: Wang, Liwei; Hu, Huan; Wu, Tao; Liu, Aiping; Wu, Ziqin; Wang, Qian; Narayanaswamy, Balaji; Liang, Zhimin; Wang, Dianlong; Yang, Guang

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 1, pp. 83-100. DOI: 10.1089/3dp.2021.0055
2、Improved Sintering Quality and Mechanical Properties of Peanut Husk Powder/Polyether Sulfone Composite for Selective Laser Sintering
Author: Idriss, Aboubaker I. B.; Li, Jian; Guo, Yanling; Wang, Yangwei; Elfaki, Elkhawad A.; Ahmed, Elhaj A., I

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 1, pp. 111-123. DOI: 10.1089/3dp.2021.0036
3、Rotation-Assisted Separation Model of Constrained-Surface Stereolithography
Author: Hu, Min; Cheng, Haobo; Feng, Yunpeng

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 1, pp. 146-155. DOI: 10.1089/3dp.2021.0001
4、Simulating and Predicting the Part Warping in Fused Deposition Modeling by Thermal-Structural Coupling Analysis
Author: Chen, Guoguang; Wang, Dashuang; Hua, Weijian; Wu, Weibin; Zhou, Wuyi; Jin, Yifei; Zheng, Wenxu

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 1, pp. 70-82. DOI: 10.1089/3dp.2021.0119
5、Investigation and Improvement of Pushing Dislocation in Ceramsite Sand Three-Dimensional Printing
Author: Gao, Guili; Du, Zhimin; Zhang, Weikun; Liu, Qingyi; Su, Yanqing; Ni, Yunqiang; Shi, Dequan

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 2, pp. 289-297. DOI: 10.1089/3dp.2021.0088
6、The Influence of Interface Design and External Frame on the Energy Absorption Performance of the Semi-Auxetic Structure
Author: Zhang, Xuexia; Yan, Pengfei; Yan, Biao

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 2, pp. 269-278. DOI: 10.1089/3dp.2021.0134
7、Printing Ready Topology Optimization for Material Extrusion Polymer Additive Manufacturing
Author: Yan, Jingjing; Yuan, Zhiling; Liu, Qiang; Liu, Guoliang; Li, Lei

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 2, pp. 197-212. DOI: 10.1089/3dp.2021.0189
8、Ceramic 3D Printing via Dye-Sensitized Photopolymerization Under Green LED
Author: Wang, Gang; Ma, Chuanzhe; Hu, Tianyu; Wang, Tao

Journal: 3D PRINTING AND ADDITIVE MANUFACTURING. 2023; Vol. 10, Issue 2, pp. 310-317. DOI: 10.1089/3dp.2021.0204