Science And Technology Of Welding And Joining SCIE

國際簡稱：SCI TECHNOL WELD JOI 參考譯名：焊接與連接科學與技術

主要研究方向：工程技術-材料科學：綜合非預警期刊審稿周期：約3.0個月

《焊接與連接科學與技術》(Science And Technology Of Welding And Joining)是一本由Maney Publishing出版的以工程技術-材料科學：綜合為研究特色的國際期刊，發表該領域相關的原創研究文章、評論文章和綜述文章，及時報道該領域相關理論、實踐和應用學科的最新發現，旨在促進該學科領域科學信息的快速交流。該期刊是一本未開放期刊，近三年沒有被列入預警名單。

3區 中科院分區
Q1 JCR分區
74 年發文量
3.1 IF影響因子
未開放 是否OA
63 H-index
1996 創刊年份
Bimonthly 出版周期
English 出版語言

Science and Technology of Welding and Joining is an international peer-reviewed journal covering both the basic science and applied technology of welding and joining.

Its comprehensive scope encompasses all welding and joining techniques (brazing, soldering, mechanical joining, etc.) and aspects such as characterisation of heat sources, mathematical modelling of transport phenomena, weld pool solidification, phase transformations in weldments, microstructure-property relationships, welding processes, weld sensing, control and automation, neural network applications, and joining of advanced materials, including plastics and composites.

[ 查看全部 ]

投稿咨詢加急咨詢

Science And Technology Of Welding And Joining期刊信息

ISSN：1362-1718
出版語言：English
是否OA：未開放
E-ISSN：1743-2936
出版地區：ENGLAND
是否預警：否
出版商：Maney Publishing
出版周期：Bimonthly
創刊時間：1996
開源占比：0.0115
Gold OA文章占比：5.19%
OA被引用占比：0.0283...
出版國人文章占比：0.34
出版撤稿占比：0
研究類文章占比：95.95%

Science And Technology Of Welding And Joining CiteScore評價數據（2024年最新版）

CiteScore

SJR

SNIP

CiteScore 指數

6.1

0.865

1.349

學科類別	分區	排名	百分位
大類：Physics and Astronomy 小類：Condensed Matter Physics	Q1	101 / 434	76%
大類：Physics and Astronomy 小類：General Materials Science	Q2	136 / 463	70%

名詞解釋：CiteScore 是衡量期刊所發表文獻的平均受引用次數，是在 Scopus 中衡量期刊影響力的另一個指標。當年CiteScore 的計算依據是期刊最近4年（含計算年度）的被引次數除以該期刊近四年發表的文獻數。例如，2022年的 CiteScore 計算方法為：2022年的 CiteScore =2019-2022年收到的對2019-2022年發表的文件的引用數量÷2019-2022年發布的文獻數量注：文獻類型包括：文章、評論、會議論文、書籍章節和數據論文。

Science And Technology Of Welding And Joining中科院評價數據

中科院 2023年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	材料科學	3區	METALLURGY & METALLURGICAL ENGINEERING 冶金工程 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	2區 3區

中科院 2022年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	材料科學	2區	METALLURGY & METALLURGICAL ENGINEERING 冶金工程 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	2區 3區

中科院 2021年12月舊的升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	材料科學	2區	MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合 METALLURGY & METALLURGICAL ENGINEERING 冶金工程	2區 2區

中科院 2021年12月基礎版

Top期刊	綜述期刊	大類學科		小類學科
否	否	工程技術	3區	MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合 METALLURGY & METALLURGICAL ENGINEERING 冶金工程	3區 2區

中科院 2021年12月升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	材料科學	2區	MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合 METALLURGY & METALLURGICAL ENGINEERING 冶金工程	2區 2區

中科院 2020年12月舊的升級版

Top期刊	綜述期刊	大類學科		小類學科
否	否	材料科學	2區	METALLURGY & METALLURGICAL ENGINEERING 冶金工程 MATERIALS SCIENCE, MULTIDISCIPLINARY 材料科學：綜合	2區 3區

Science And Technology Of Welding And Joining JCR評價數據（2023-2024年最新版）

按JIF指標學科分區	收錄子集	分區	排名	百分位
學科：MATERIALS SCIENCE, MULTIDISCIPLINARY	SCIE	Q2	208 / 438	52.6%
學科：METALLURGY & METALLURGICAL ENGINEERING	SCIE	Q1	20 / 90	78.3%

按JCI指標學科分區	收錄子集	分區	排名	百分位
學科：MATERIALS SCIENCE, MULTIDISCIPLINARY	SCIE	Q2	188 / 438	57.19%
學科：METALLURGY & METALLURGICAL ENGINEERING	SCIE	Q1	21 / 91	77.47%

Science And Technology Of Welding And Joining歷年數據統計

影響因子

中科院分區

Science And Technology Of Welding And Joining中國學者發文選摘

1、Track irregularity behaviours in electron beam selective melting
Author: Wu, Chaochao; Zhao, Haiyan; Li, Hongxin; Lin, Feng

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 27-37. DOI: 10.1080/13621718.2022.2111502
2、The effect of oscillating capping TIG welding on residual stresses of 2219-T8 butt joint
Author: Zhao, Tianyi; Zhao, Yue; Wang, Qiang; Wan, Zhandong; Shang, Pengcheng; Wu, Aiping; Yan, Dongyang

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 38-43. DOI: 10.1080/13621718.2022.2113953
3、A novel Ni-Co-Al multi-principal filler wire for inhibiting Fe-Ti intermetallic compounds in welding CP-Ti/Q345 bimetallic sheets
Author: Liu, Dejia; Wang, Weixiong; Li, Bin; Jiao, Haitao; Tang, Yanchuan; Hu, Yong; Zhao, Longzhi

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 52-62. DOI: 10.1080/13621718.2022.2115667
4、Al-Zn-Mg-Cu alloy with both high strength and high plasticity fabricated with wire arc additive manufacturing
Author: Yuan, Tao; Ren, Xuelei; Chen, Shujun; Jiang, Xiaoqing

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 81-88. DOI: 10.1080/13621718.2022.2117532
5、Continuous repair of groove damages using solid-state friction rolling additive manufacturing method
Author: Liu, Haibin; Sun, Yangyang; Xie, Ruishan; Shi, Yanchao; Shi, Qingyu; Chen, Shujun

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 2, pp. 89-97. DOI: 10.1080/13621718.2022.2117533
6、Material flow and microstructure evolution on the flow path of friction stir lap welded aluminium alloy
Author: Han, Yang; Jiang, Xiaoqing; Yuan, Tao; Chen, Shujun; Gong, Wentao; Li, Xiaoxu; Yu, Zhanliang

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 72-80. DOI: 10.1080/13621718.2022.2117531
7、Study on the microstructure and failure mechanisms for flat resistance element welding-bonding aluminium alloy/Q235 steel joints
Author: Fei, Liangyu; Zhao, Shengdun; Zhang, Peng; Feng, Zhiyan; Jiang, Fei; Zhang, Yiming

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 1, pp. 63-71. DOI: 10.1080/13621718.2022.2116693
8、Variety of microstructure and mechanical properties along the laser impact welded interface
Author: Wang, Qihan; Wang, Kangnian; Wang, Huimin; Zheng, Wenyue

Journal: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING. 2023; Vol. 28, Issue 2, pp. 128-136. DOI: 10.1080/13621718.2022.2131085